FPGA设计中的亚稳态问题及其预防方法研究

由于在复杂FPGA（Field Programmable Gate Array,现场可编程门阵列）设计中存在跨时钟域,通常会产生亚稳态现象.为有效地预防和解决该问题,分析FPGA设计中亚稳态的产生机理及其对数字信号处理系统的影响.根据不同的信号同步类型,针对单比特电平信号、脉冲信号和边沿信号,分别给出基于触发器级联的跨时钟域信号同步方法;针对并行信号,提出基于异步FIFO （First In First Out,先进先出队列）和握手协议的跨时钟域同步方法;并通过仿真手段分析信号同步方法的有效性及其适用范围.结果表明：这些方法能够正确有效地完成跨时钟域信号同步,预防可能出现的亚稳态问题,从而提高复杂FPGA设计的可靠性和稳定性.     

A constitutive model coupling damage and material anisotropy for wide stress triaxiality

A constitutive model that can describe the damage evolution of anisotropic metal sheets during the complex forming processes which experience wide stress triaxiality history is essential to accurately predict the deformation and rupture behaviors of the processes. In this study, a modified Lemaitre damage criterion which couples with the anisotropic Barlat 89 yield function is established. The effects of stress triaxiality, Lode parameter and shear stress on damage accumulation are considered in the constitutive model. The model is numerically implemented and applied to fracture prediction in tensile tests with different stress triaxialities and a complex deformation process with wide stress triaxiality history. The good consistency of predictions and experiments indicates that the modified Lemaitre damage model has excellent fracture prediction ability. Finally, the accuracy of the model is analyzed and discussed.     

扩散连接界面缺陷对Ti-6Al-4V合金力学性能的影响

研究了φ4mm与φ2mm的扩散连接界面缺陷对Ti-6Al-4V合金力学性能的影响。当拉伸载荷方向与缺陷平面平行时,材料的强度与塑性与无缺陷材料相当,这是由于此类缺陷对样品受力截面的面积几乎没有影响。含有φ4mm缺陷试样的拉压疲劳寿命展现出很大的分散性,界面缺陷并未成为裂纹萌生的唯一位置。从表面起裂的样品均处于高寿命区域,而绝大部分从缺陷处起裂的样品均落于低寿命区域。有限元分析表明,当缺陷位于中心位置时其引起的应力集中较小,应力分布梯度较小;缺陷位于边缘位置时,应力集中效应增大。     

航天器安全防护保障探讨

把对航天器安全的威胁分为硬和软两大类，分析了对航天器产生威胁的类别，以及为保证航天器安全而需要采取的措施。介绍了研究的内容，需要建设的空间信息对抗系统和空间信息探测网。     

A100钢外螺纹椭圆超声滚压强化试验研究

A100钢有较高的疲劳抗力和显著的减重效果.在航空工业中,飞机起落架主要承力件正逐步采用A100钢,且主要承力件多采用螺纹联接.为了提高螺纹疲劳寿命,提出了超声振动滚压强化工艺方法,设计了外螺纹超声滚压强化装置,进行了螺纹超声滚压强化前后性能对比试验.利用X射线分析仪、维式硬度计、粗糙度仪和疲劳试验机,分别测量了螺纹超声滚压强化前后的残余应力、维氏硬度、表面粗糙度以及疲劳寿命.结果表明,超声滚压强化后牙底残余应力提高了70％,显微硬度提高了14％,粗糙度降低了51％,600MPa应力条件下寿命提高了5倍.     

热变形对TC4氩弧拼焊板拉伸与疲劳性能的影响

在700℃下,对TC4氩弧拼焊板进行了3个变形量(主应变0.5％、1.6％、2.7％)的等双向拉伸成形,研究了热变形对TC4氩弧拼焊板单向拉伸性能和疲劳寿命的影响.结果表明:等双拉变形前后,TC4氩弧拼焊板拉伸试样均断裂在焊接热影响区,热影响区的强度低于母材和焊缝.随着等双拉热变形量增加,TC4拼焊板试样疲劳寿命有所增加,这是因为一定变形量的热成形释放了焊接残余应力.     

C/SiC复合材料紧固件拉-拉疲劳行为研究

为了研究C/SiC复合材料紧固件的拉-拉疲劳行为,在疲劳应力比为0. 1、加载频率为10 Hz的条件下对不同应力水平的疲劳寿命进行统计。采用断口分析和金相分析方法对C/SiC复合材料螺钉疲劳破坏的细观机制进行了研究。结果表明:C/SiC复合材料螺钉拉-拉疲劳包含拉断疲劳及拉脱疲劳两种失效形式;基于双参数幂指数形式的寿命模型,两种失效形式的疲劳寿命经验公式相似;C/SiC复合材料螺钉的疲劳极限约为拉伸强度的65%～70%,若最大疲劳应力大于0. 7σmax,其材料损伤随循环次数增多而明显增大。     

基于混合编程技术的AOCC应用软件快速仿真平台

介绍基于混合编程技术的AOCC应用软件的快速仿真平台的整体框架设计以及具体实现．基于该方法构建的快速仿真平台，能够满足软件开发人员对基于8086汇编语言开发的AOCC应用软件开、闭环调试和测试的要求，对提高软件的开发效率和保证软件的质量有积极意义．     

Matching suitable feature construction for SAR images based on evolutionary synthesis strategy

In the paper,a set of algorithms to construct synthetic aperture radar（SAR）matching suitable features are frstly proposed based on the evolutionary synthesis strategy.During the process,on the one hand,the indexes of primary matching suitable features（PMSFs）are designed based on the characteristics of image texture,SAR imaging and SAR matching algorithm,which is a process involving expertise;on the other hand,by designing a synthesized operation expression tree based on PMSFs,a much more flexible expression form of synthesized features is built,which greatly expands the construction space.Then,the genetic algorithm-based optimized searching process is employed to search the synthesized matching suitable feature（SMSF）with the highest effciency,largely improving the optimized searching effciency.In addition,the experimental results of the airborne synthetic aperture radar ortho-images of C-band and P-band show that the SMSFs gained via the algorithms can reflect the matching suitability of SAR images accurately and the matching probabilities of selected matching suitable areas of ortho-images could reach 99±0.5%.